Coriolis Mass Flowmeters
- State of the art transmitter technology combining best in class simplicity of use and highest accuracy from high end DSP technology
- Model No.FCT300
- Brand ABB
- ABB’s CoriolisMaster series delivers world-class coriolis mass flowmeters for a wide variety of applications.
- Wide range of meter sizes provide precise measurement of massflow, volume flow, density, temperature and concentration.
- ABB's CoriolisMaster series has a history of success in a wide variety of industries and applications.
- With innovations like sensor memory, easy set-up and no up or downstream piping requirements - they save time and money during installation, commissioning and maintenance.
- Benefits of using ABB’s CoriolisMaster flowmeters:
- Save cost by making several measurements with one device
- Reduce flowmeter maintenance by up to 90 %
- No mechanical wear and minimize installation issues
- Save up to 25 % on pump power
- Save critical installation space
- They are some of the most compact coriolis mass flowmeters on the market.
- With no up or downstream piping requirements they can be installed in the tightest spaces, enabling applications not possible before.
- Plus, their low pressure drop and wide measurement span save you money compared to other brands and make them the better alternative for many applications.
- Both new meters offer:
- Coriolis mass flow advantage - multivariable measurement of mass flow, density and temperature in one device Compact size with no up or downstream piping requirements - get the benefits of coriolis mass flow in tight spaces Low pressure drop - save 25% on pump energy costs compared to other brands
- Wide measurement span in a single meter - other brands require two meter sizes to meet all applications that costs more in spares and installation
- Easy to use - features ABB's unique common HMI for easy set-up and commissioning
- Model number: FCB300 for standard applications
- Process connections:
- Flange DIN 2501 / EN 1092-1: DN 10 … 200, PN 40 … 100
- Flange ASME B16.5: DN 1/4“ … 8“ PN CL150 … CL600
- Threaded pipe connection DIN 11851: DN 10 … 100 (1/4“ … 4“)
- Tri-Clamp: DIN 32676 (ISO 2852) ,BPE Tri-Clamp, DN 10 … 100 (1/4“ … 4“)
- Other connections: On request
- Wetted materials: Stainless steel ,Hasteloy C (optional)
- Degree of protection acc. to EN 60529: IP 65 / 67, NEMA 4X
- Enclosure: Integral mount design, remote mount design
- Cable length: Maximum 10 m (33 ft), remote mount design only
- Power supply: 100 … 230 V AC, 24 V AC/DC
- Current output: Current output 1: 0/4 … 20 mA active or 4 … 20 mA passive , Current output 2: 4 ... 20 mA passive
- Pulse output: Active (not Zone 1 / Div. 1) or passive
- External output zero return: Yes
- External totalizer reset: Yes
- Forward / reverse flow metering: Yes
- Communication: HART protocol
- Empty pipe detection: Yes, based on preconfigured density alarm < 0.5 kg/l
- Self-monitoring and diagnostics: Yes
- Local display / totalization: Yes
- Field optimization for flow and density : Yes
- The precise position of the PA terminals may vary according to the device type. Each terminal is marked accordingly.
- When the FCT330, FCT350 transmitter is connected to the FCB330, FCT350 flowmeter sensor, the transmitter must also be connected to "PA".
- The following flowmeter sensor / transmitter combinations are permitted:
- FCB330 flowmeter sensor with FCT330 transmitter
- FCB350 flowmeter sensor with FCT350 transmitter
- Net oil measurement (water cut)
- Production and test separators
- Natural gas and condensate
- Natural gas liquids (NGLs and LNGs)
- Density measurement for production water
- LACT units
- Pipe line metering
No Datasheet Available
- Our Focus
- Oilfield|Drilling|Refinery|Petrochemical|Power|Process|Commercial