Wire Rope Drill Lines for Onshore, Offshore, Oil & Gas Industries. A comprehensive range of Drill Line Rope 6X19, 6X26,6X31 Configurations
Deteriorating Forces Protection
- Abrasion
- Drum/Sheave wear fatigue
- Crushing forces from multi-layer winding on drum
- Shock load
Enhanced Drill Line Properties
- Flexibility
- Abrasion resistance
- Stable construction to absorb crushing forces
Drillflex 6/Drillform 6/6P/Drillform 8/8P
Construction | Nominal Rope Diameter | |
Rope | in. | mm |
6x19S | 1 to 1-1/2 | 25 - 42 |
6x26SW | 15/8 to 2-1/4 | 25 - 58 |
6x31SW | 1 to 1-1/2 | 25 - 38 |
Drillflex 6
Nominal Rope Diameter | Approximate Mass | Minimum Breaking Force | |||||
in. | mm | lb/ft | kg/m | EIPS | EEIPS | ||
MT | kN | MT | kN | ||||
1 | 26 | 1.85 | 2.75 | 46.9 | 460 | 51.6 | 506 |
1 1/8 | 29 | 2.34 | 3.48 | 58.9 | 578 | 64.9 | 636 |
1 1/4 | 32 | 2.89 | 4.30 | 72.5 | 711 | 79.7 | 782 |
1 3/8 | 35 | 3.49 | 5.19 | 87.1 | 854 | 96.2 | 943 |
1 1/2 | 38 | 4.16 | 6.19 | 103 | 1010 | 113 | 1110 |
1 5/8 | 42 | 4.88 | 7.26 | 119 | 1170 | 133 | 1300 |
1 3/4 | 45 | 5.66 | 8.42 | 139 | 1360 | 153 | 1500 |
1 7/8 | 48 | 6.49 | 9.66 | 158 | 1550 | 174 | 1710 |
2.0 | 52 | 7.39 | 11.0 | 179 | 1760 | 197 | 1930 |
2 1/8 | 54 | 8.34 | 12.4 | 201 | 1970 | 220 | 2160 |
2 1/4 | 58 | 9.35 | 13.9 | 224 | 2200 | 247 | 2420 |
Note: The Wire Rope conforms to the applicable sections of API Specification 9A.
Drillform 6/6P
Nominal Rope Diameter | Approximate Mass | Minimum Breaking Force | |||||
in. | mm | lb/ft | kg/m | 1770 | 1960 | ||
MT | kN | MT | kN | ||||
1 | 26 | 2.00 | 2.97 | 47.0 | 461 | 53.9 | 529 |
1 1/8 | 29 | 2.53 | 3.76 | 59.6 | 584 | 68.3 | 670 |
1 1/4 | 32 | 3.12 | 4.64 | 73.5 | 721 | 84.3 | 827 |
1 3/8 | 35 | 3.77 | 5.61 | 88.9 | 872 | 102 | 1000 |
1 1/2 | 38 | 4.37 | 6.50 | 104 | 1023 | 120 | 1176 |
1 5/8 | 42 | 5.13 | 7.63 | 122 | 1201 | 141 | 1380 |
1 3/4 | 45 | 5.95 | 8.85 | 142 | 1393 | 163 | 1600 |
1 7/8 | 48 | 6.83 | 10.2 | 163 | 1599 | 187 | 1838 |
2.0 | 52 | 7.77 | 11.6 | 185 | 1819 | 213 | 2090 |
2 1/8 | 54 | 8.76 | 13.0 | 206 | 2022 | 237 | 2328 |
2 1/4 | 58 | 9.83 | 14.6 | 231 | 2270 | 266 | 2613 |
Note: The Wire Rope conforms to the applicable sections of API Specification 9A.
Drillformax 6
Diameter | Mass | MBF | |||||
Metric | Imperial | Metric | Imperial | Force | Load | ||
mm | in. | Air | Water | Air | Water | 1770 | 1770 |
kg/m | kg/m | lb/ft | lb/ft | kN | tonnes | ||
28.6 | 1 1/8 | 3.71 | 3.15 | 2.50 | 2.12 | 686 | 69.9 |
31.8 | 1 1/4 | 4.58 | 3.89 | 3.08 | 2.62 | 833 | 84.9 |
34.9 | 1 3/8 | 5.53 | 4.70 | 3.72 | 3.16 | 1000 | 102 |
38.1 | 1 1/2 | 6.58 | 5.59 | 4.43 | 3.77 | 1170 | 119 |
41.3 | 1 5/8 | 7.71 | 6.55 | 5.19 | 4.41 | 1380 | 141 |
44.5 | 1 3/4 | 8.95 | 7.61 | 6.03 | 5.12 | 1590 | 162 |
50.8 | 2 | 11.7 | 9.95 | 7.88 | 6.70 | 2010 | 205 |
These figures are for guidance only. Other features, such as MBF, dimensions, lay type and plastic fill can be designed on request.
Drillform 8/8P
Nominal Rope Diameter | Approximate Mass | Minimum Breaking Force | |||||
in. | mm | lb/ft | kg/m | 1960 | 2160 | ||
MT | kN | MT | kN | ||||
3/4 | 19 | 1.12 | 1.66 | 32.3 | 317 | 34.6 | 339 |
7/8 | 22 | 1.53 | 2.27 | 44.2 | 434 | 47.3 | 464 |
1.0 | 26 | 2.00 | 2.97 | 57.8 | 567 | 61.8 | 606 |
1 1/8 | 29 | 2.58 | 3.84 | 73.1 | 717 | 78.2 | 767 |
1 1/4 | 32 | 3.23 | 4.81 | 91.6 | 899 | 97.9 | 960 |
1 3/8 | 35 | 3.86 | 5.75 | 109.4 | 1073 | 117.0 | 1148 |
1 1/2 | 38 | 4.56 | 6.79 | 129.3 | 1268 | 138.3 | 1357 |
1 5/8 | 42 | 5.57 | 8.29 | 157.9 | 1549 | 168.9 | 1657 |
1 3/4 | 45 | 6.37 | 9.48 | 176.9 | 1735 | 189.2 | 1856 |
1 7/8 | 48 | 7.43 | 11.06 | 206.2 | 2023 | 220.4 | 2162 |
2.0 | 52 | 8.33 | 12.39 | 231.0 | 2266 | 247.2 | 2425 |
Note: The Wire Rope conforms to the applicable sections of API Specification 9A.