Drilling Rig Chain

Drill Rig Chain

High loads and abrasive conditions are common for roller chain in the tough drilling environment. Renold's range of heavy duty drive chains ensure maximum productivity and service life on drill rigs.

	Chain No.	Pitch	Inside Width Min.	Roller Diam. Max.	Plate Thickness Max.	Plate Height Max	Pin Diam. Max	Pin Length Max.	Minimum Tensile Strength	Average Tensile Strength	Weight	Number of Links per 10ft
HT Series		A	B	C	D	E	G	H	lbs.	lbs.	lb/ft
	100HT	1.25	0.75	0.75	0.19	1.16	0.38	1.68	28,674	32,866	3.11	96
	120HT	1.50	0.99	0.87	0.23	1.43	0.44	2.10	38,581	44,938	4.64	80
	140HT	1.75	0.99	1.00	0.26	1.67	0.50	2.24	50,706	63,551	5.84	68
	160HT	2.00	1.24	1.13	0.29	1.90	0.56	2.65	68,343	76,724	7.63	60
	180HT	2.25	1.40	1.41	0.32	2.14	0.69	2.98	85,980	104,082	10.47	54
	200HT	2.50	1.50	1.56	0.38	2.37	0.78	3.35	126,995	148,008	12.95	48
	240HT	3.00	1.86	1.87	0.51	2.85	0.94	4.30	190,000	208,232	20.88	40

HX Series		A	B	C	D	E	G	H
	100HX	1.25	0.75	0.75	0.19	1.19	0.38	1.69	30,000	32,866	3.26	96
	120HX	1.50	0.99	0.87	0.23	1.43	0.44	2.10	44,063	44,938	4.87	80
	140HX	1.75	0.99	1.00	0.26	1.67	0.50	2.24	57,326	63,551	6.00	68
	160HX	2.00	1.24	1.13	0.29	1.90	0.56	2.65	72,838	76,724	7.80	60
	180HX	2.25	1.40	1.41	0.32	2.14	0.69	3.02	99,366	104,082	10.91	54
	200HX	2.50	1.50	1.56	0.38	2.37	0.78	3.41	135,000	148,008	13.59	48
	240HX	3.00	1.86	1.87	0.51	2.85	0.94	4.20	190,000	208,232	21.30	40

NA Series (Narrow Width)

NA Series (Narrow Width)		A	B	C	D	E	G	H
	240HNA	3.00	1.27	1.87	0.50	2.85	0.94	1.85	19,374	21,244	19.30	40
	240NA	3.00	1.27	1.87	0.37	2.85	0.94	1.61	13,256	14,545	15.54	0

Download Catalog

Dubai:

1008 Dome Tower,Cluster N
PO Box 487952, JLT
DUBAI, United Arab Emirates
Tel: +971 4 4207528, +971 4 3995700
[email protected]

Sharjah:

Hamriyah Free Zone
PO Box 51234
SHARJAH, United Arab Emirates
Tel: +971 6 5269160
[email protected]