Tank Safety & Overpressure Protection Systems
Manufactured by a reliable manufacturer (Pi Controls Europe) and customized by Gulf Oil & Gas (GOI International). Delivering precision-engineered, API 2000, ISO 16852, ASME Section VIII, and ATEX certified pressure and environmental protection across the Middle East, Africa, and CIS regions.
Comprehensive Storage & Pressure Boundary Integrity
Welcome to the central authority for industrial tank safety, atmospheric vapor control, and overpressure explosion protection. As the mother page connecting five mission-critical safety disciplines, this portal provides sizing logic, material customization, and regulatory compliance for storage terminals, refineries, and high-hazard plants. Under our engineering collaboration, Gulf Oil & Gas (GOI International), headquartered in the United Arab Emirates, coordinates custom sizing, specialized metallurgy fabrication, certified valve integration, and turnkey technical support, utilizing proven equipment manufactured by a reliable manufacturer (Pi Controls Europe).
Select the Right Tank Safety Device
Gulf Oil & Gas (GOI International) supplies these safety devices with application review, customization, engineering coordination, documentation, and regional commercial support.
Tank Venting & Environmental Safety
Breather Valves (PVRV)
Direct-acting pressure and vacuum relief valves designed to protect atmospheric and low-pressure storage tanks from overpressurization rupture and catastrophic vacuum implosion during operational liquid movement and ambient thermal shifts.
- Primary Standards: API 2000, ISO 28300, API 2521
- Configurations: Weight Loaded, Spring Loaded, Pipe-away
- Size Range: 1" (DN25) to 24" (DN600)
- Leakage Tightness: < 0.03 Nm³/hr air at 90% set pressure
- Custom Metallurgy: Aluminium LM6, Carbon Steel, SS316, Hastelloy
Emergency Relief Valves
High-capacity emergency venting valves (Model Series PES-ERV-701) designed for external pool fire contingency scenarios where standard breather valves cannot evacuate massive vapor generation rates, preventing catastrophic shell or roof tear.
- Design Codes: API 2000 Emergency Venting Sizing
- Sizes Available: 1" to 24"+ (DN25 to DN600+) Flanged
- Safety Mechanism: Non-sparking brass seating & self-aligning cover
- Pressure Relief: Custom-weighted set points for low-pressure tanks
- Seals & Diaphragms: FEP, PTFE, Viton, Buna-N
Fire & Explosion Prevention
Flame Arresters
Safety barriers configured with precision-crimped stainless steel ribbon matrix elements based on the Maximum Experimental Safe Gap (MESG) principle to quench flame fronts and stop deflagrations or detonations from reaching storage vessels.
- Design & Testing: ISO 16852, API 2000 (7th Ed), ATEX
- Arrester Types: Inline Deflagration, End-of-Line, Inline Detonation
- Gas Groups: IEC Group IIA, IIB, and IIC
- Size Envelope: DN15 (1/2") to DN600 (24")
- Matrix Options: SS316L, SS316Ti, Hastelloy C, ECTFE coated
Explosion Vents
Passive, non-reclosing deflagration relief panels that provide instantaneous, unrestricted venting area during combustible dust, vapor, or gas deflagrations inside silos, spray dryers, baghouse filters, and cyclones.
- Standards Compliance: EN 14797, NFPA 68, ASME Section VIII
- Panel Configurations: Buckling Type, Flat Composite, Domed Multi-layer
- Static Activation (Pstat): 0.5 to 2500 kg/cm² custom calibrated
- Venting Capacity: Up to 1,200,000 Nm³/hr air at NTP
- Thermal Capability: Operational tolerance up to 800°C
Passive Pressure Relief Devices
Rupture Discs
Non-reclosing pressure-relief devices featuring calibrated, ultra-thin precision membranes designed to burst instantaneously at predetermined differential pressures, serving as standalone protection or PRV inlet isolation against toxic/corrosive fluids.
- Design Codes: ASME Code Sec VIII UG-127, API 520 / 526 / 527, ISO 4126-2
- Disc Types: Forward-Acting (Tension), Reverse-Acting (Buckling), Graphite
- Burst Pressures: 0.5 kg/cm² to 2500 kg/cm² with bubble-tight zero leakage
- Materials: SS 316L, Hastelloy C-276, Inconel 625, Monel 400, Tantalum, PTFE
- Safety Accessories: Burst Disc Indicators (BDI), Sensors, Safety Holders
Customized for Your Process Envelope
Gulf Oil & Gas (GOI International) coordinates product selection around the actual tank, vessel, process medium, operating envelope, and project specification — not a generic catalogue selection.
Review service medium, fluid vapor properties, tank geometry, and electrical/explosion hazard classifications.
Confirm design pressure, vacuum limits, operating temperature, pumping flow rates, and API 2000 fire-case venting.
Recommend optimal configuration, custom exotic metallurgy, flange standards, and telemetry burst sensors.
Provide comprehensive technical documentation, hydro/leak test certificates, and expedited regional site delivery.
Gulf Oil & Gas (GOI International) Technical Offering: Engineering & Customization
At Gulf Oil & Gas (GOI International), we deliver fully engineered and bespoke safety skids tailored precisely to project client specifications, severe operating conditions, and stringent regional standards across the Middle East, Africa, and CIS.
Custom Flow Sizing Calculations
Rigorous sizing of normal breathing, thermal in/out venting, and external fire case venting in strict compliance with API 2000 calculations and ISO 28300 formulas.
Tailored Exotic Metallurgy
Selection and custom machining in Hastelloy C-276, Inconel 625, Monel, Duplex SS, Titanium, and Tantalum lining for sour gas (NACE MR0175/ISO 15156) and aggressive chemicals.
Custom Pressure & Set Calibration
In-house computerized test benches capable of setting tight cracking tolerances, bubble-tight seal verification, and pneumatic seat leakage inspection under 0.03 Nm³/hr.
Skid Packaging & Automation
Integrated vapor management packages combining PVRVs, flame arresters, nitrogen blanketing valves, and explosion suppression telemetry panels ready for site drop-in.
Industries Using Tank Safety Products
Solutions can be configured for storage, transfer, processing, and explosion-risk applications across energy and critical process industries.
- Oil and Gas Production & Upstream Extraction
- Refineries and Downstream Hydrocarbon Processing
- Chemical and Specialty Chemical Synthesis
- Tank Farms and Bulk Storage Terminals
- LNG, LPG, and Cryogenic Gas Processing
- Fuel Depots and Aviation Fuel Bunkering
- Marine, Shipbuilding, and Offshore FPSO Facilities
- Power Generation and Combined Cycle Utilities
- Pharmaceutical & Fine Chemical Manufacturing
- Food, Beverage, and Edible Oil Storage
- Paints, Inks, Coatings, and Industrial Solvents
- Mining, Minerals, and Carbon Black Handling
- Steel, Cement, and Smelting Facilities
- Fertilizer and Agrochemical Production Plants
- Biofuels and Renewable Green Energy Plants
- Water and Wastewater Treatment Digesters
- Biogas Plants and Hazardous Waste Handling
- Grain Processing, Flour Milling, and Silos
- Battery Manufacturing and Energy Storage Facilities
- Industrial Gas Generation (Hydrogen, Oxygen, Nitrogen)
- Pulp, Paper, and Chemical Recovery Plants
Serving the GCC, Middle East, Africa, and CIS
Gulf Oil & Gas (GOI International), headquartered in the United Arab Emirates, supports technical enquiries, stock supply, and project coordination across key energy hubs and industrial cities.
Middle East
Full support for national energy companies, private EPC contractors, and bulk storage hubs:
- United Arab Emirates (Head Office): Dubai, Abu Dhabi, Sharjah, Fujairah, Ras Al Khaimah
- Kingdom of Saudi Arabia: Riyadh, Jubail, Dammam, Yanbu, Khobar, Jeddah
- State of Qatar: Doha, Ras Laffan, Mesaieed
- Sultanate of Oman: Muscat, Sohar, Salalah, Duqm
- State of Kuwait: Kuwait City, Ahmadi, Shuaiba
- Kingdom of Bahrain: Manama, Sitra
- Republic of Iraq: Basra, Baghdad, Erbil, Kirkuk
Africa
Covering Northern, Western, Central, Southern, and Eastern industrial corridors:
- North Africa: Egypt (Cairo, Alexandria, Suez), Algeria (Algiers, Oran, Arzew, Hassi Messaoud), Morocco (Casablanca, Tangier), Tunisia (Tunis, Sfax), Libya (Tripoli, Benghazi), Mauritania (Nouakchott)
- West Africa: Nigeria (Lagos, Port Harcourt, Warri), Ghana (Accra, Takoradi), Senegal (Dakar), Ivory Coast (Abidjan), Cameroon (Douala, Kribi)
- Central & Southern Africa: Angola (Luanda, Soyo), Mozambique (Maputo, Pemba), Gabon (Port-Gentil, Libreville), Republic of Congo (Pointe-Noire), Equatorial Guinea (Malabo), South Africa (Johannesburg, Durban, Cape Town), Namibia (Windhoek, Walvis Bay), Botswana (Gaborone), Zambia (Lusaka, Ndola), Zimbabwe (Harare)
- East Africa: Kenya (Nairobi, Mombasa), Tanzania (Dar es Salaam), Uganda (Kampala)
CIS Nations
Low-temperature arctic-grade metallurgy, high-altitude calibration, and extreme environment solutions:
- Republic of Kazakhstan: Astana, Almaty, Atyrau, Aktau, Shymkent
- Republic of Uzbekistan: Tashkent, Navoi, Bukhara, Samarkand
- Republic of Azerbaijan: Baku, Sumgait, Ganja
- Turkmenistan: Ashgabat, Türkmenbaşy
- Kyrgyzstan: Bishkek
- Tajikistan: Dushanbe
- Armenia: Yerevan
- Georgia: Tbilisi, Batumi
- Eastern Europe / CIS: Belarus (Minsk), Moldova (Chișinău)
Regulatory Codes, Testing Regimes & Certifications
Manufactured and verified to international quality benchmarks for atmospheric and pressurized storage vessels.
| Category | Product Link | Applicable Design Codes | Key Factory Verification Standards |
|---|---|---|---|
| 1. Tank Venting & Environmental Safety | Breather Valves (PVRV) | API 2000, ISO 28300, API 2521 | Seat Leakage <0.03 Nm³/hr, Flow Capacity Verification, Set-point Calibration |
| Emergency Relief Valves | API 2000 Fire Venting, OSHA 1910.106 | Full-Bore Lift Testing, Spark-Free Seat Seal Integrity, Reseat Validation | |
| 2. Fire & Explosion Prevention | Flame Arresters | ISO 16852, API 2000, ATEX Directive 2014/34/EU | Hydrostatic Pressure, Flashback Deflagration & Detonation Burn Resistance, MESG Gap Check |
| Explosion Vents | EN 14797, NFPA 68, ASME Sec VIII | Static Activation Burst Tolerance (Pstat), Cycle Fatigue, Non-Fragmenting Discharge | |
| 3. Passive Pressure Relief Devices | Rupture Discs | ASME Sec VIII Div 1 (UG-127), API 520, ISO 4126-2 | ASME UD Stamp, Helium Leak Rate, Cycle Life, High/Low Temperature Verification |
Frequently Asked Engineering Questions
Essential guidance on product sizing, customization criteria, and project documentation.
How does Gulf Oil & Gas (GOI International) customize the safety devices?
Selection and engineering customization may include tailored pressure and vacuum set-points, emergency fire venting capacity sizing, ANSI/DIN/JIS flange drilling, body and trim metallurgy (such as Hastelloy, Monel, Inconel, or Duplex), custom flame-arresting ribbon matrix elements, specialized chemical-resistant coatings, sub-zero low-temperature testing, and complete EN 10204 3.1 certification documentation.
Which process data should be submitted for technical sizing?
To accurately calculate sizing according to API 2000 or ISO 16852, provide the service medium name and vapor properties (molecular weight, flash point, MESG), storage tank volume and geometry, maximum liquid pump-in and pump-out rates, operating and design temperatures, Maximum Allowable Working Pressure (MAWP) and vacuum, required set-points, hazardous-area classification, and any existing nitrogen blanketing or vapor recovery systems.
Are these systems available for both Greenfield projects and MRO replacements?
Yes. Gulf Oil & Gas (GOI International) coordinates new project capital supply (skids, comprehensive valve packages), replacement devices with drop-in face-to-face dimensions, replacement element banks, spare rupture disc cartridges, and retrofit audits subject to client specifications and project delivery timelines.