ICAM IAS800 Air Sampling Smoke Detection
The system incorporates a high-performance aspirator and flow monitoring circuitry that can be configured using software. The air flow level is visually represented on a bar graph consisting of ten elements, which can be customized to set high and low flow thresholds. In the event of flow failure, the system reports it as a device fault through one or two MZX Technology MIM800 addressable modules.
- The IAS800 system is available in three configurations:
- IAS801 single inlet pipe configuration- It can be fitted with one detector.
- AS800 twin inlet pipe configuration – It can be fitted with two detectors for monitoring one or two pipe runs.
- IAS802 twin inlet pipe configuration with independent fault outputs - It can be fitted with two detectors for monitoring one or two separate pipe runs with independent fault outputs.
Mechanical Data | |
Pipework network: | 50 m per inlet with 2 aspiration apertures per tube |
External diameter of pipework: | 25 mm |
Internal diameter of pipework: | 21 mm |
Dimensions (W xHx D): | 259 X 184 X 166 mm |
IP rating: | IP65 |
Electrical Data | |
Supply voltage: | 18-30 V DC |
Comment: | The sensors are supplied from the line |
Power consumption: | 120-300 mA |
Ambient Conditions | |
Operating Temp: | -10°C to +50°C rel. |
Humidity (non-condensing): | 10-95% |
Approvals | |
EN 54-20: | Class C |